Daily cleaning: After work every day, use a clean, soft dust-free cloth to gently wipe the surface of the granite precision base to remove floating dust. Wipe gently and thoroughly, making sure every corner is covered. For parts that are difficult to reach, such as corners, the dust can be swept out with the help of a small brush without damaging the surface of the base. Once stains are found, such as cutting fluid sputtered during processing, handprints, etc., should be treated immediately. Spray an appropriate amount of neutral detergent on a dust-free cloth, gently wipe the stain, then wipe the residual detergent with a clean damp cloth, and finally wipe it dry with a dry dust-free cloth. It is strictly prohibited to use cleaners containing acidic or alkaline ingredients, so as not to corrode the granite surface and affect the accuracy and beauty.
Regular deep cleaning: Depending on the environment and frequency of use, it is recommended to carry out a deep cleaning every 1-2 months. If the platform is in a high pollution, high humidity environment, or is used very frequently, the cleaning cycle should be appropriately shortened. During deep cleaning, carefully remove other components on the precision hydrostatic air floating platform to avoid collision and damage during cleaning. Then, with clean water and a soft brush, carefully scrub the surface of the granite base, focusing on cleaning the fine gaps and holes that are difficult to reach in daily cleaning, and removing the long-term accumulation of dirt. After brushing, rinse the base with plenty of water to ensure that all cleaning agents and dirt are thoroughly washed away. During the flushing process, a high-pressure water gun can be used (but the water pressure must be controlled to avoid impact on the base) to wash from different angles to improve the cleaning effect. After washing, place the base in a well-ventilated and dry environment to dry naturally, or use clean compressed air to dry, to prevent water spots or mildew caused by water stains on the surface of the base.
Regular inspection and maintenance: every 3-6 months, the use of professional measuring instruments to detect the flatness, straightness and other precision indicators of granite precision base. If the accuracy deviation is found, professional maintenance personnel should be contacted in time for calibration and repair. At the same time, check whether the surface of the base cracks, wear and other conditions, for minor wear, can be partially repaired; In the event of serious cracks or damage, the base should be replaced to ensure that the precision hydrostatic air floating movement platform is always in optimal operating condition. In addition, in the daily operation and maintenance process, special attention should be paid to prevent tools, workpieces and other heavy objects from colliding with the base, and obvious warning signs can be set in the working area to remind the operator to operate carefully.
To meet the above environmental requirements and do a good job of cleaning and maintenance of the granite precision base, we can give full play to its advantages in the precision static pressure air floating movement platform to ensure that the platform provides high-precision and high-stability motion control services for various industries. If enterprises can pay attention to these details in the production environment and equipment maintenance, they will seize the opportunity in precision manufacturing, scientific research and other fields, enhance their competitiveness, and achieve sustainable development.
Post time: Apr-10-2025