Granite components are commonly used in industrial computed tomography products to ensure the accuracy and precision of the results. CT scanning and metrology require a high level of precision, and granite components are used to ensure that the machines work effectively. In this article, we will discuss the requirements of granite components for industrial computed tomography products on the working environment and how to maintain the working environment.
Requirements of Granite Components for Industrial CT Products
Granite components have high stiffness, low thermal expansion, and a low coefficient of thermal expansion. These properties make them suitable for use in industrial computed tomography products. Granite components can be used as a base for the scanner’s rotation stage, as well as a base for the gantry that holds the scanner. To ensure that the granite components work effectively, certain environmental conditions must be maintained. The following are the requirements of granite components for industrial computed tomography products on the working environment:
1. Temperature Control
A standard temperature has to be maintained in the working environment to avoid thermal gradients and ensure that the microscope works effectively. The temperature of the working environment should be consistent throughout the day, and the changes in temperature must be minimal. Additionally, it is essential to keep away from heat sources such as radiators, air conditioners, and refrigerators.
2. Humidity Control
Maintaining a consistent relative humidity is equally important as temperature control. The humidity level needs to be kept at the recommended level to avoid any condensation of moisture.20%-55% is recommended as the relative humidity for maintaining the accuracy and efficiency of the scanning procedure.
3. Cleanliness
A clean environment is critical to the accuracy of the industrial computed tomography product. The accuracy of the results can be hampered when contaminants such as dust, oil, and grease are present in the scanning environment. To maintain a clean environment, it is important to clean the granite components and the room regularly.
4. Lighting
It is essential to maintain consistent lighting in the working environment. Poor lighting can cause the accuracy of the scans to decrease. Natural light should be avoided, and it is best to use artificial lighting that is consistent and not too bright.
How to Maintain the Working Environment
To maintain an accurate environment working environment, the following practices can be helpful:
1. Set up a Clean Room Environment
To maintain the cleanliness of the working environment, a clean room can be set up. It is designed to control particles and prevent contamination. A cleanroom provides the necessary environmental conditions for industrial computed tomography products.
2. Keep the Temperature Consistent
Temperature control is crucial for industrial computed tomography products to work effectively. It is necessary to maintain a constant temperature of between 20-22°C in the working environment. To achieve this, it is essential to keep the doors and windows closed, as well as minimize the opening and closing of doors.
3. Control the Humidity
Maintaining a consistent environment is important for the accuracy of industrial computed tomography products. Therefore, it’s necessary to control the humidity levels. Humidity should be reduced to below 55%, and the surfaces kept dry to reduce the risk of moisture condensation.
4. Proper Cleaning
To ensure a clean environment, the granite components and working surfaces should be cleaned with isopropyl alcohol. The cleaning process should be performed regularly to ensure the environment remains clean.
Conclusion
In conclusion, maintaining the working environment for industrial computed tomography products is crucial. The environment needs to be free of contaminants, and the temperature and humidity need to be maintained at specific levels. Practising the above-listed tips can help to maintain an accurate environment for industrial computed tomography products. This will ensure that the granite components used in CT scanning and metrology machines can function effectively and provide precise results.
Post time: Dec-07-2023